Install GitLab with Docker

GitLab is a free Git repository management application, like GitHub or Bitbucket, that you can run on your own Linode. This guide will show you how to install GitLab using the official GitLab Docker image.

The GitLab application has a number of services it depends on, including PostgreSQL, Nginx, and Redis. A major benefit of using Docker to install GitLab is that these dependencies are isolated to a single easy-to-update and self-contained image.

Before You Begin

Choose An Appropriately Sized Linode

GitLab is a resource-intensive application. To get the most out of GitLab, we recommend a Linode with at least 8GB of memory and at least 2 CPU cores. For more information on system requirements, visit the GitLab Hardware Requirements page.

Secure your Server

Review and implement the measures in the Setting Up and Securing a Compute Instance guide, including creating a limited user account.

Change your Linode’s Default SSH Port

One of GitLab’s features is the ability for you to push and fetch code changes to and from your repository over SSH. When installing GitLab, the software will need to bind to port 22, which is the standard port for SSH. Your system’s SSH service already runs on this port by default, so you will receive an error from GitLab if you don’t address this conflict.

To fix this, you’ll want to change the port that your system’s SSH service listens on. This can be accomplished by editing your Linode’s /etc/ssh/sshd_config file and changing the Port assignment. The example snippet below changes the port from 22 to port 26:

File: /etc/ssh/sshd_config

1 2 3

... Port 26 ...

When editing the file, you may also need to uncomment the Port line by removing the # character from the start of the line, if one is present. After updating this file and saving the change, restart the SSH service:

sudo systemctl restart sshd

Close your current SSH session and create a new one, making sure to specify the new port. You can do this by supplying the -p flag:

ssh your_limited_user@192.0.2.2 -p 26

(Optional) Update your DNS Records

Assign a domain or subdomain to your GitLab server. This step is optional, as you can always access GitLab via your server’s IP address. However, using a domain is necessary if you would like to take advantage of GitLab’s built in SSL support, which uses Let’s Encrypt to issue certificates. This guide’s examples will use gitlab.example.com.

It takes some time for DNS changes to propagate through the internet, so it’s suggested that you do this before you set up GitLab. There are several options for updating your DNS records:

• If you already use Linode’s name servers, or if you would like to use them for your domain, review the DNS Manager guide. You will need to set up an A record which is assigned your Linode’s IP address.

• If you use a different DNS provider, review that provider’s documentation for setting up a new A record.

  Updating DNS records at common nameserver authorities

  The following support documents describe how to update DNS records at common nameserver authorities:

  • CloudFlare
  • GoDaddy
  • DreamHost
  • Gandi
  • 1&1
  • Network Solutions
  • Bluehost
  • HostGator
  • Namecheap
  • Hover

You can test to see if your DNS changes have propagated with the dig command:

dig +short gitlab.example.com

192.0.2.2

Once your changes have propagated, you can move forward with the installation.

Install Docker

You must have Docker installed on your Linode to continue.

To install Docker CE (Community Edition), follow the instructions within one of the guides below:

• Installing and Using Docker on Ubuntu and Debian

• Installing and Using Docker on CentOS and Fedora

For complete instructions on even more Linux distributions, reference the Install Docker Engine section of Docker’s official documentation.

Install the GitLab EE Image

After installing Docker, download the latest GitLab Enterprise Edition Docker image from DockerHub. This image contains everything GitLab needs in order to run: PostgreSQL, Nginx, Redis, etc. To download the image, run the following pull command:

sudo docker pull gitlab/gitlab-ee:latest

sudo docker pull gitlab/gitlab-ce:latest

It may take a few minutes to download the image. When the download is complete, you can view a list of all installed Docker images with the images command:

sudo docker images

Configure and Run GitLab

In order to configure and run the GitLab container, you need to provide a few options at runtime.

1. Consider the following command, a version of which you will use to start the GitLab container:

   sudo docker run --detach \
     --hostname gitlab.example.com \
     --publish 443:443 --publish 80:80 --publish 22:22 \
     --name gitlab-linode \
     --restart always \
     --volume /srv/gitlab/config:/etc/gitlab \
     --volume /srv/gitlab/logs:/var/log/gitlab \
     --volume /srv/gitlab/data:/var/opt/gitlab \
     --env GITLAB_OMNIBUS_CONFIG="external_url 'https://gitlab.example.com/';" \
     gitlab/gitlab-ee:latest
   

   Descriptions for each option

   --detach runs the Docker container as a background process, as opposed to running it in the foreground.

   --hostname defines the container’s internal hostname.

   --publish tells the container to publish ports, or ranges of ports, to the host. Because GitLab accepts connections on the HTTP (80), HTTPS (443), and SSH (22) ports, this option is declared three times. If you wanted to access GitLab from a non-standard port on your host, you would provide the host port first, and the container port second after the semi-colon. For instance if you wanted to access GitLab SSH on port 3333, you would write --publish 3333:22.

   --name allows you to apply a label to your container, for use when referencing the container within a Docker network.

   --restart specifies a restart policy for the container. Here it is set to always, meaning that the container, if exited, will automatically be restarted.

   --volume defines the host mounted volumes the container uses to store persistent data. These three volumes store application data, log files, and configuration files. The value to the left of the semi-colon is the local location, and the value to the right is the container location.

   --env supplies the variable GITLAB_OMNIBUS_CONFIG, which can hold a series of values, separated by a colon, that correspond to the GitLab Omnibus configuration settings. In this case, an external URL is supplied. Some additional settings might include SMTP configuration values so that GitLab can send activity emails.

   As of GitLab 10.7, if you provide an external URL with a HTTPS protocol, GitLab will automatically set up SSL certificates using Let’s Encrypt, and all traffic will be forwarded to HTTPS. For more information about this functionality, read the GitLab SSL Documentation

   As an alternative to specifying the GITLAB_OMNIBUS_CONFIG variable via the --env option, you can edit the GitLab configuration file directly. For more instructions on how to do that, visit the Configure GitLab documentation.

2. In the above command, replace the values for the --hostname option and for the external_url configuration setting with the domain or subdomain for your GitLab site. If you did not set up DNS for your site, enter http://your_linode_ip (not https) for the external_url setting. Then, run the command.

   Note

   If you are using the GitLab Community Edition image, replace gitlab/gitlab-ee:latest with gitlab/gitlab-ce:latest

   The container may take a few moments to start. After it starts, you’ll be given a container ID like the following:

   1093d89f9a0af8e4c79e0352e57721b09050d07c86c37d601145a856f3ed1502

3. It will take an additional few minutes to be able to access GitLab in your browser after the container starts. You can find out more information about the startup process by monitoring the logs:

   sudo docker logs -f gitlab-linode
   

   To exit from the log monitoring process, enter CTRL-C. This will not stop the container from running.

4. Load the GitLab site in your web browser. If you try to load it too shortly after starting the container, you may see an HTTP 502 error. If this happens, try waiting for a few more minutes and then refresh your page.

5. The first time you access the site it will prompt you to enter an administrative password. Enter a complex password and record it somewhere safe.

6. Log in to your GitLab site by entering root as the user along with the password you created in the previous step.

Create your First Project

Each repository in GitLab belongs to a project. A project includes: a repository for your files, an issues tracker, a section for merge requests, a wiki, continuous integration and continuous delivery (CI/CD) pipelines, and other features to support your development.

1. To create your first repository, click Create a project.

2. You will be taken to the New Project page. Enter the project name. You can optionally alter the project’s slug, enter a description, or change the visibility of the project. Once you’re done, click Create project.

3. Once your project has been created, you’ll be provided with an empty project repository:

4. If you didn’t have GitLab create a README.md file during project setup, instructions on how to start using your repository from the command line will be shown.

   Enter those commands on your computer to add a new README.md to your repository and push it back up to your GitLab repository. Change the domain in the git clone command to your site’s domain:

   git clone https://gitlab.example.com/testuser/example-project.git
   cd example-project
   touch README.md  # Or create the file in your editor and enter a project description
   git add README.md
   git commit -m "add README"
   git push -u origin master
   

Manage the GitLab Container

To view all of your running containers, you can issue the ps command:

sudo docker ps

To stop the GitLab container, issue the stop command by supplying the container ID you procured with the ps command, or supply the container name:

sudo docker stop gitlab-linode

To start a stopped container, issue the start command by supplying the container ID or container name:

sudo docker start gitlab-linode

Once the container has stopped, you can remove the container using the rm command, again supplying the container ID or container name:

sudo docker container rm gitlab-linode

Upgrading GitLab

To upgrade GitLab to the newest version, you must stop and remove the container, pull the newest image, and then recreate the container:

sudo docker stop gitlab-linode
sudo docker rm gitlab-linode
sudo docker pull gitlab/gitlab-ee:latest

sudo docker run --detach \
  --hostname gitlab.example.com \
  --publish 443:443 --publish 80:80 --publish 22:22 \
  --name gitlab-linode \
  --restart always \
  --volume /srv/gitlab/config:/etc/gitlab \
  --volume /srv/gitlab/logs:/var/log/gitlab \
  --volume /srv/gitlab/data:/var/opt/gitlab \
  --env GITLAB_OMNIBUS_CONFIG="external_url 'https://gitlab.example.com/';" \
  gitlab/gitlab-ee:latest

Remember to provide your own hostname, name, and external URL. If you are using GitLab Community Edition, specify the gitlab/gitlab-ce:latest image instead.

Next Steps

GitLab offers many features that are worth taking the time to understand and utilize. Here are a few next steps to take after you’ve completed this guide:

• Upload an SSH key to your GitLab account so that you can transfer files over SSH.

• Explore CI/CD pipelines to streamline your development practices.

• Using your root GitLab account, explore the Admin settings to customize the functionality of GitLab.

• Review Linode’s Git documentation:

  • Getting Start with Git

  • How to Install Git on Linux, Mac or Windows

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• GitLab EE Docker Image
• GitLab Docker Documentation
• GitLab SSL Configuration